banner_page

MAX1831EEE+

16 Terminals 3V 16-Pin MAX1831 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 1MHz Tube 16-SSOP (0.154, 3.90mm Width)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX1831EEE+
  • Package: 16-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 701
  • Description: 16 Terminals 3V 16-Pin MAX1831 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 1MHz Tube 16-SSOP (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SSOP (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2001
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number MAX1831
Function Step-Down
Number of Outputs 1
Efficiency 94 %
Output Voltage 3.3V
Output Type Adjustable (Programmable)
Max Output Current 3A
Operating Supply Voltage 5.5V
Voltage - Input (Min) 3V
Input Voltage-Nom 3.3V
Analog IC - Other Type SWITCHING REGULATOR
Output Configuration Positive
Max Output Voltage 5.5V
Voltage - Output (Min/Fixed) 1.1V 1.5V 2.5V 3.3V
Topology Buck
Control Mode CURRENT-MODE
Frequency - Switching 1MHz
Control Technique CONSTANT OFF TIME
Synchronous Rectifier Yes
Nominal Input Voltage 5.5V
Min Output Voltage 3.3V
Height 1.55mm
Length 4.98mm
Width 3.99mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX1831EEE+ Overview


A Tube package is used in this voltage regulator to optimize performance. This harley voltage regulator has 16 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. Space savings are achieved by placing this voltage regulator in the 16-SSOP (0.154, 3.90mm Width) package. There are 1 outputs on DC DC switching regulator. This DC DC switching regulator generates Adjustable (Programmable) output on its output pins. This switching regulator is designed to fit the Surface Mount mounting system. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. This voltage regulator 12v reaches a switching frequency of 1MHz. Despite its low input voltage, this voltage regulator can operate. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.1V 1.5V 2.5V 3.3V. Its 260 peak reflow temperature makes this regulator essentially indestructible. Voltage regulator is designed to provide a nominal input voltage of 3.3V to meet the operation requirements. As part of the MAX1831 series of regulators, the voltage regulators can be found. Voltage can be produced at 3.3V volts by voltage regulator. To operate the voltage regulator 12v, 16 pins are required. For this switching regulator, we recommend keeping the output voltage at at least 3.3V volts. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 3A A. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 5.5V. DC-DC switching regulator with supply voltage 5.5V.

MAX1831EEE+ Features


1 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 5.5V

MAX1831EEE+ Applications


There are a lot of Maxim Integrated MAX1831EEE+ Voltage Regulators applications.

  • Machining centers
  • Analog precision reference circuits
  • Die casting equipment
  • Energy management systems
  • Medical monitoring systems
  • Electrical distribution systems
  • Ball screw pair
  • Power supplies of electronic gadgets
  • USB circuits
  • Imported equipment

Write a review

Note: HTML is not translated!
    Bad           Good