Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX1842 |
Function |
Step-Down |
Number of Outputs |
1 |
Efficiency |
96 % |
Output Voltage |
2.5V |
Output Type |
Adjustable (Programmable) |
Max Output Current |
2.7A |
Operating Supply Voltage |
5.5V |
Voltage - Input (Min) |
3V |
Input Voltage-Nom |
3.3V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Current - Output |
1A |
Max Output Voltage |
5.5V |
Voltage - Output (Min/Fixed) |
1.1V 1.5V 1.8V 2.5V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
1MHz |
Control Technique |
CONSTANT OFF TIME |
Synchronous Rectifier |
Yes |
Min Output Voltage |
1.1V |
Height |
1.55mm |
Length |
4.98mm |
Width |
3.99mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX1842EEE+ Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. In this voltage regulator, there are a total of 16 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. The harley voltage regulator is available as a 16-SSOP (0.154, 3.90mm Width) package to save space. There are 1 outputs configured on the voltage regulator. DC DC switching regulators like this one generate Adjustable (Programmable) outputs on their output pins to handle the power management. This switching regulator is designed to fit the Surface Mount mounting system. Keeping dc to dc voltage regulator's operating temperature at -40°C~85°C TA is essential when operating. A DC-DC switching regulator of this type operates at a switching frequency of 1MHz. Despite its low input voltage, this voltage regulator can operate. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.1V 1.5V 1.8V 2.5V. This voltage regulator 12v features maximum design flexibility thanks to its 1A output current. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.3V for the purposes of operation. A voltage regulator 12v such as this falls under the Switching Regulator or Controllers category and belongs to this category. As part of the MAX1842 series of regulators, the voltage regulators can be found. Voltage of voltage regulator can be delivered at 2.5V volts. There are 16 pins that are used for the operation of the voltage regulator 12v. This voltage regulator 12v should be configured with an output voltage that is at least 1.1V. Switching regulator has a maximum output current of 2.7A A, which is sufficient to meet the requirements of operation. DC DC switching regulator offers a maximum output voltage of 5.5V as its maximum output voltage. With 5.5V as the supply voltage, this DC-DC switching regulator will operate.
MAX1842EEE+ Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 5.5V
MAX1842EEE+ Applications
There are a lot of Maxim Integrated MAX1842EEE+ Voltage Regulators applications.
- Planers
- Automatic testing equipment
- Sink circuits
- Solar power plants
- Surge protection circuits
- Refrigerators of central air conditioners
- Combined machine tools
- Boring machines
- Production lines
- Product testing