MAX1842EEE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1842 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 2.5V |
| Output Type | Adjustable (Programmable) |
| Max Output Current | 2.7A |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 1A |
| Voltage - Output (Min/Fixed) | 1.1V 1.5V 1.8V 2.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | CONSTANT OFF TIME |
| Synchronous Rectifier | Yes |
| Length | 4.89mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1842EEE+T Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. There are 16 terminations in this voltage regulator. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. In order to save space, this voltage regulator is packaged in the 16-SSOP (0.154, 3.90mm Width) package. The voltage regulator is configured with 1 outputs. There are output pins on this DC DC switching regulator that generate Adjustable (Programmable) output. Surface Mount-mount switching regulator. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~85°C TA. This voltage regulator 12v reaches a switching frequency of 1MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 3V. DC DC switching regulator's output voltage (Min/Fixed) amounts to 1.1V 1.5V 1.8V 2.5V. DC DC switching regulator's 1A output current allows for maximum design flexibility. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 3.3V. The regulator voltage is included in the Switching Regulator or Controllers subcategory of voltage regulators. In the particular voltage regulators, the MAX1842 family is represented. The voltage DC DC switching regulator can produce is 2.5V volts. The switching regulator operation is carried out by 16 pins. Accordingly, dc to dc voltage regulator's maximum output current is 2.7A A. An input voltage of 5.5V is used to operate this harley voltage regulator.
MAX1842EEE+T Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 5.5V
MAX1842EEE+T Applications
There are a lot of Maxim Integrated MAX1842EEE+T Voltage Regulators applications.
- PSRR circuits
- Balance equipment
- Experimental setup
- Refrigerators of central air conditioners
- Domestic water pumps
- Low output voltage switching power supply circuits
- Computer application technology
- Direct power supply system
- Electric heating, lighting
- Special machining machine tools
