MAX1858EEG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1858 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~23V |
| Control Features | Current Limit, Enable, Frequency Control, Reset |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 660kHz |
| Duty Cycle | 90 % |
| Height Seated (Max) | 1.73mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1858EEG+T Overview
Capsuled in the 24-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 2 output generation. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 4.75V~23V voltage are supplied and operated. Suitable for a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 100kHz~600kHz. The Surface Mount makes it ideal for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Reset. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 24 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. Search for "MAX1858" to find other relevant dc to dc converter ics. Total pins of switching converter are 24. In particular, switching converter belongs to the Switching Regulator or Controllers family. Input voltage of dc dc voltage regulator should be 4.75V. As determined by the test statistics, the output voltage of DC regulator is 18V. normally, the dc dc regulator's output current is 10A, which you should keep in mind when starting a project. DC switcher's Surface Mount qualifies it for most applications and prototypes. It is estimated that this dc regulatorhas a maximum frequency of 660kHz.
MAX1858EEG+T Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
MAX1858EEG+T Applications
There are a lot of Maxim Integrated MAX1858EEG+T DC to DC converter applications.
- Electrical distribution systems
- Machining centers
- Automatic testing equipment
- Emergency lighting monitoring equipment
- Planers
- Various precision measuring detectors
- Analog precision reference circuits
- Program control systems
- Boring machines
- Production lines
