MAX1876AEEG+
| Parameters | |
|---|---|
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 255.5993mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1876 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 23V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Operating Supply Current | 6mA |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~23V |
| Control Features | Current Limit, Enable, Frequency Control, Reset |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 660kHz |
| Height Seated (Max) | 1.73mm |
MAX1876AEEG+ Overview
It comes in a 24-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 2 outputs. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 4.5V~23V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. This switching controller can switch at 100kHz~600kHz. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Reset. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 24 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. You can find other relevant dc to dc converter ics by searching "MAX1876". There are 24 pins on switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. The test statistics indicate that DC regulator outputs a voltage of 18V. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. This dc regulatorhas a max frequency of 660kHz. Users should apply 23V to operate the voltage regulator dc to dc safely and reliably. The supply current is 6mA.
MAX1876AEEG+ Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
MAX1876AEEG+ Applications
There are a lot of Maxim Integrated MAX1876AEEG+ DC to DC converter applications.
- Linear guide
- Textile machinery
- Serial communication converter
- Photovoltaic power
- Computed tomography (CT)
- Shearing machines
- Scientific research
- Direct power supply system
- Analog precision reference circuits
- Radio equipment
