MAX1876AEEG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1876 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 23V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~23V |
| Control Features | Current Limit, Enable, Frequency Control, Reset |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 660kHz |
| Height Seated (Max) | 1.73mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1876AEEG+T Overview
The switching controller fits in the 24-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. For outputs of 2, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 4.5V~23V. Worked in an dc switcher with a -40°C~85°C TA rating. A switching controller such as this can switch at a value of 100kHz~600kHz . dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Reset. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. Different dc switching's functions can be applied to 24 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. MAX1876 can be used to locate other relevant dc to dc converter ics. There are 24 pins on switching converter. Input voltage of dc dc voltage regulator should be 4.5V. DC regulator outputs 18V voltage based on test statistics. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is a maximum frequency of 660kHz for this dc regulators. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 23V.
MAX1876AEEG+T Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
MAX1876AEEG+T Applications
There are a lot of Maxim Integrated MAX1876AEEG+T DC to DC converter applications.
- Textile machinery
- Photovoltaic power
- Arc suppression circuits
- Product burn-in
- Computer-related products
- Digital display device
- Electric water heaters
- Television equipment
- Servo drive system
- Plate bending machines
