MAX1897ETP+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-WQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | Quick-PWM™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO REQUIRES A BATTERY VOLTAGE OF 4V TO 28V |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1897 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Current Limit, Enable, On Time Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 300kHz 550kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 550kHz |
| Height Seated (Max) | 0.75mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1897ETP+T Overview
Capsuled in the 20-WQFN Exposed Pad package, the switching controller can be used for a wide range of applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 4.5V~5.5V voltage are supplied and operated. Worked in a -40°C~85°C TA dc switcher before. This switching controller can switch at 200kHz 300kHz 550kHz. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, On Time Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . An array of 20 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. In addition to "MAX1897", there are other relevant dc to dc converter ics you can find. Pins number 20 of switching converter in total. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4.5V. A maximum voltage of 5.5V is accepted by the dc to dc regulator as an input voltage. This dc regulatorhas a max frequency of 550kHz. For better satisfaction, the value of DC to DC voltage regulator is ALSO REQUIRES A BATTERY VOLTAGE OF 4V TO 28V. It belongs to the dc to dc voltage regulator series Quick-PWM?.
MAX1897ETP+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 550kHz
Current Limit, Enable, On Time Control
PULSE WIDTH MODULATION
ALSO REQUIRES A BATTERY VOLTAGE OF 4V TO 28V
MAX1897ETP+T Applications
There are a lot of Maxim Integrated MAX1897ETP+T DC to DC converter applications.
- Household control circuits
- Injection molding machinery
- Plate bending machines
- Wide-range voltage regulation circuits
- Correction machines
- Thermal power
- Magnetohydrodynamic power
- Emergency lighting monitoring equipment
- Digital precision reference circuits
- Post equipment
