MAX1910EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1910 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Operating Supply Voltage | 5.3V |
| Input Voltage-Nom | 3.6V |
| Power Dissipation | 444mW |
| Max Supply Current | 2.5mA |
| Input Voltage (Min) | 2.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current-Max | 0.08A |
| Switcher Configuration | DOUBLER INVERTER |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| Number of Segments | 4 |
| Voltage - Supply (Min) | 2.7V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1910EUB+T Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package is used for saving board space. As part of the design of this LED driver, there are 1 outputs that have been used.Surface Mount is used for mounting.With high efficiency, it appears as a DC DC Regulator.The LED driver is capable of operating at a temperature of -40°C~85°C TA.There are considerable benefits for Backlight.This system operates at 750kHz frequency.For its operation, 10 terminations are designed.It has a base configuration of 10 pins.Undetermined failures can occur if the voltage supply is below 2.7V.In total, it includes 4 segments.On the Surface Mount, a device is mounted.The LED driver can be found under the base part number MAX1910.10 pins are used on the device.In addition, it can be classified as Other Analog ICs according to its characteristics.When the maximum supply current is below 2.5mA, it is capable of delivering high efficiency.Systems require 5.3V voltage to operate.The voltage at the output terminal is 5V.A circuit operated by the device has 3.6V volts.When its input voltage exceeds 2.7V, its operation is convenient.There should be no more than 0.08A current coming out of the output.
MAX1910EUB+T Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 750kHz
Operating with the supply voltage of 5.3V
Output voltage of 5V
MAX1910EUB+T Applications
There are a lot of Maxim Integrated MAX1910EUB+T LED Driver ICs applications.
- Street lighting
- Replacement lamps
- Architectural lighting
- LED backlight driver for LCD displays for portable equipment
- Amusement Machines
- LED backlight driver for LCD displays for Tablets and Note PCs
- Scanners and Handy Terminals
- White LED Backlight for portable equipment
- Auxiliary lights for on-vehicle cameras
- Power source for accessories such as car audios, car navigation systems, and ETC systems
