MAX1912EUB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | UMAX |
| Number of Pins | 10 |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Analog ICs |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5.3V |
| Input Voltage-Nom | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Power Dissipation-Max | 444mW |
| Power Dissipation | 444mW |
| Max Supply Current | 2.5mA |
| Current - Output | 120mA |
| Voltage - Output | 5V |
| Input Voltage (Min) | 2.7V |
| Topology | Boost, Charge Pump |
| Switcher Configuration | DOUBLER INVERTER |
| Number of Segments | 4 |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
MAX1912EUB Overview
Board space is saved by its UMAX package.For the design of this LED driver, 1 outputs are used.The system operates on the basis of the frequency 750kHz.In this case, the terminations are set to 10.The LED light driver is configured with a base of 0 pins.Based on our estimates, there are 4 segments.It has been mounted on Surface Mount.There is 5V voltage output from the device.In this device, there are 10 pins.The Other Analog ICs is also assigned based on its characteristics.As long as the supply current is less than 2.5mA, this device can provide high efficiency.For stable operation, the operating temperature should not exceed 85°C.Maintaining a temperature above -40°C is essential for stabilizing operation.Powering systems requires an internal voltage of 5.3V.There are 3.6V volts assigned to the circuit when operating the device.Ensure that the part output current is 120mA.It is greatly simplified when used with input voltages greater than or equal to 2.7V.This device uses SWITCHED CAPACITOR REGULATOR analog IC .
MAX1912EUB Features
Available in the UMAX package
Frequency of 750kHz
Operating with the supply voltage of 5.3V
MAX1912EUB Applications
There are a lot of Maxim Integrated MAX1912EUB LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- White LED Backlight for portable equipment
- Linear fluorescent
- A- lamps
- Medical surgery lighting
- Dimmable LED for vehicle interiors
- Stage Lighting and Signage
- Gallery lighting
- LED backlight driver for LCD displays for portable equipment
- Down lighting
