MAX1912EUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1912 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 3.6V |
| Input Voltage (Min) | 2.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current-Max | 0.06A |
| Input Voltage (Max) | 5.3V |
| Switcher Configuration | DOUBLER INVERTER |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| Voltage - Supply (Max) | 5.3V |
| Voltage - Supply (Min) | 2.7V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX1912EUB+ Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package saves space on the board. These LED drivers have 1 outputs.The mounting method is Surface Mount.When it emerges as a DC DC Regulator, it shows high-performance and reliability.The led light driver can work at -40°C~85°C TA.Backlight has many benefits.Based on the frequency of 750kHz, it operates on the basis of a pulse.The terminations 10 are designed for its operation.Under 2.7V voltage supply, undetermined failures may occur.The LED driver can be found under the base part number MAX1912.A device with 10 pins is available.This device is optimized to deliver a maximum voltage level of 5.3V.When operating the device, 3.6V volts are assigned to the circuit.It is greatly simplified when used with input voltages greater than or equal to 2.7V.It is possible to achieve high stability by keeping the input voltage below the 5.3V point.There should be no more than 0.06A current coming out of the output.
MAX1912EUB+ Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 750kHz
MAX1912EUB+ Applications
There are a lot of Maxim Integrated MAX1912EUB+ LED Driver ICs applications.
- Panel lighting
- Street lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- General lighting
- Stage and Studio lighting
- Other Electronic Devices
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Dimmable LED for vehicle interiors
- White LED Backlight for portable equipment
