MAX1920EUT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1920 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 4V |
| Output Type | Adjustable |
| Max Output Current | 400mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.25V |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1920EUT+T Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. A voltage regulator consists of 6 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. Space savings are achieved by placing this voltage regulator in the SOT-23-6 package. The voltage regulator 12v has 1 outputs. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. Surface Mount-mount switching regulator. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. In this voltage regulator 12v, the switching frequency is 1.2MHz. Input voltage 2V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. Voltage regulator's input voltage can reach 5.5V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 3.6V. This voltage regulator is included in the Switching Regulator or Controllers subcategory. As part of the MAX1920 series of regulators, the voltage regulators can be found. There is a possibility that DC DC switching regulator can give voltage at 4V volts. In order to operate voltage regulator, there are 6 pins that must be connected. The output voltage of this voltage regulator 12v should at least be set at 1.25V volts at all times. For switching regulator maximum operation, dc to dc voltage regulator delivers 400mA A. It provides the adjusting voltage regulator's maximal output voltage of 4V. Switching regulators such as this operate from voltages of 5.5V.
MAX1920EUT+T Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 5.5V
MAX1920EUT+T Applications
There are a lot of Maxim Integrated MAX1920EUT+T Voltage Regulators applications.
- Motor controller circuits
- Hydraulic presses
- Various precision measuring instruments
- Computed tomography (CT)
- Fire elevators
- Adjustable voltage or current linear circuits
- Smoke exhaust equipment
- Automatic plug-in machines
- Analog precision reference circuits
- PSRR circuits
