MAX1922ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1922 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 35μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 μs |
| Switch Type | USB Switch |
| Supply Current-Max (Isup) | 0.025mA |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1922ESA+ Overview
It is packaged in the manner of a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.Mounting type Surface Mount is selected for the LED driving board.It owns USB Switch switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.A voltage of 2.7V~5.5V is used to power it.A maximum output voltage of P-Channel volts can be obtained with this LED driver.It comes under the family of MAX1922.It has a total of 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.The LED driver has 1 functions.From the lighting driver, there is a maximum output of 1AV.The supply voltage of 5V is conducive to high efficiency.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 8 pins.125mOhm is the resistance of the lighting driver.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.The maximum supply voltage is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 3V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.The total number of channels is 1.In this case, the power supply is 3/5V.Through the use of this lighting driver, we can also produce UNDERVOLTAGE LOCKOUT.It operates at a maximum supply current of 0.025mA.
MAX1922ESA+ Features
Supplied from 5V
Resistance of 125mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
MAX1922ESA+ Applications
There are a lot of Maxim Integrated MAX1922ESA+ Power Switches ICs applications.
- Wearable Devices
- Notebook PC
- Handheld Devices
- Wireless Modem Data Cards
- PC Card Hot Swap
- USB3.1 Power Delivery
- Portable Devices
- USB Ports/Hubs
- Smartphone and PDA
- Hot Swap
