MAX1922ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1922 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Supply Current-Max (Isup) | 0.025mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1922ESA+T Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of 2.7V~5.5V.Voltage output is P-Channel volts at maximum.It is part of the MAX1922 family of LED drivers.It consists of 8 terminations in total.The operation is carried out using the 8 pins.There are 1 functions of the LED driver.The lighting driver's maximum output is 1AV.The supply voltage of 5V is conducive to high efficiency.In this case, it is mounted in the way of Surface Mount.In total, it has 8 pins.A self-contained econtainer holding Power Management Circuits capacity contains this lighting driver.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 2.7V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.We offer 1 channels in total.It has a power supply of 3/5V.With the help of this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.For operation, it has a maximum supply current of 0.025mA.
MAX1922ESA+T Features
Supplied from 5V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
MAX1922ESA+T Applications
There are a lot of Maxim Integrated MAX1922ESA+T Power Switches ICs applications.
- Hot Swap
- PDAs
- Handheld Devices
- HDD, SSD
- Wireless Headsets
- Hot Swaps
- Storage Drives
- Low Voltage I/O System Power
- USB Protection
- Set-Top Boxes
