MAX1922ETB+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1922 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Supply Current-Max (Isup) | 0.025mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX1922ETB+ Overview
As you can see, it's packaged in the way of a Tube.In the 10-WFDFN Exposed Pad package, it is included.This LED driving board is mounted using the mounting type Surface Mount.USB Switch is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It belongs to the family MAX1922.A total of 10 terminations have been found in it.It consists of 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way.This LED driver is equipped with a total of 10 pins.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.This part's power supply is 3/5V.Operation requires 0.025mA supply current.
MAX1922ETB+ Features
Supplied from 5V
1 channels
MAX1922ETB+ Applications
There are a lot of Maxim Integrated MAX1922ETB+ Power Switches ICs applications.
- Solid State Drivers
- Hot Swap
- Wireless Modem Data Cards
- Set-top-box
- USB Protection
- Set-Top Boxes
- Low Voltage I/O System Power
- USB Power Distribution
- Wireless Headsets
- Notebook and Tablet Computers
