MAX1926ETC+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1926 |
| Pin Count | 12 |
| Output Voltage | 4.2V |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Operating Supply Current | 39μA |
| Output Current | 2A |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Max Input Voltage | 12V |
| Nominal Input Voltage | 12V |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 235kHz |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Max Charge Current | 2A |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1926ETC+ Overview
This can be found in the Tube package.It comes as part of the 12-WQFN Exposed Pad package.Mounting type Surface Mount matches the device.A temperature setting of -40°C~85°C TA ensures reliable performance.There is an analog IC of BATTERY CHARGE CONTROLLER used in this device.To charge the device, Constant - Programmable current is required.It is possible to find related parts of this device by using the base part number MAX1926.It contains 12 terminations, so that is how many there are.There are 12 pins on it.Serveral programmable features like Timer.In order for it to work, it requires 12 pins.With a 12V supply voltage, it is capable of withstanding the operation of the device.When the output voltage is 4.2V, high efficiency is possible.When the operation is completed, the output current is 2A.Using a supply voltage as low as 4.5V will allow it to function.In order to mount it, it has to align itself with Surface Mount.Supply current for the gadget is set to 39μA.There is 5V voltage input on the device.As a rule of thumb, the supply voltage needs to be set to 12V for optimum efficiency.Input voltage is limited to 12V volts.At most, the part has a switching frequency of 235kHz.
MAX1926ETC+ Features
12-WQFN Exposed Pad package
MAX1926ETC+ Applications
There are a lot of Maxim Integrated MAX1926ETC+ Battery Chargers ICs applications.
- Home routers
- Portable speaker systems
- TV sticks
- Electronic dictionary
- Electric lift car
- Marine buoy lights
- Truck dealers
- Pallet jacks
- Electric pallet truck
- Wireless headphones
