banner_page

MAX1951AESA+

8 Terminals 2.6V 8-Pin MAX1951 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 1MHz Tube 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX1951AESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 942
  • Description: 8 Terminals 2.6V 8-Pin MAX1951 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 1MHz Tube 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Switching Regulator or Controllers
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Base Part Number MAX1951
Function Step-Down
Number of Outputs 1
Efficiency 94 %
Output Voltage 5.5V
Output Type Adjustable
Max Output Current 2A
Operating Supply Voltage 5.5V
Voltage - Input (Min) 2.6V
Input Voltage-Nom 3.3V
Analog IC - Other Type SWITCHING REGULATOR
Output Configuration Positive
Max Output Voltage 5.5V
Voltage - Output (Min/Fixed) 0.8V
Topology Buck
Control Mode CURRENT-MODE
Frequency - Switching 1MHz
Control Technique PULSE WIDTH MODULATION
Synchronous Rectifier Yes
Min Output Voltage 800mV
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant

MAX1951AESA+ Overview


A Tube package is used in this voltage regulator to optimize performance. During the development of this harley voltage regulator, 8 terminations were made. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. The space-saving 8-SOIC (0.154, 3.90mm Width) package is available for this voltage regulator. There are 1 outputs configured on this voltage regulator 12v. Adjusting voltage regulator's output pins generate Adjustable output. There is a switching regulator that is compatible with the Surface Mount mounting. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. 1MHz is the switching frequency of this DC-DC switching regulator. Despite its low input voltage, this voltage regulator can operate. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 0.8V. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. An input voltage of 3.3V is required to meet the requirements of the switching regulator operation. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. This DC/DC regulator belongs to the MAX1951 family. Voltage can be produced at 5.5V volts by voltage regulator. 8 pins are used for switching regulator operation. For this switching regulator, it is recommended that the output voltage is at least 800mV volts. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 2A A. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 5.5V, which is the highest available. A harley voltage regulator operates with a 5.5V supply voltage.

MAX1951AESA+ Features


1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 5.5V

MAX1951AESA+ Applications


There are a lot of Maxim Integrated MAX1951AESA+ Voltage Regulators applications.

  • Automation technology
  • SMT equipment
  • Scientific testing
  • USB circuits
  • ATMs
  • Imported equipment
  • Remotely powered electric motors
  • Digital display device
  • Refrigerators of central air conditioners
  • Smoke exhaust equipment

Write a review

Note: HTML is not translated!
    Bad           Good