MAX1954AEUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1954 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4.95V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~13.2V |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Max Duty Cycle | 93 % |
| Duty Cycle (Max) | 91% |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1954AEUB+ Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 3V~13.2V. Suitable for work in a -40°C~85°C TA dc switcher. Switching can be done at 300kHz with this switching controller. dc dc regulator is made easier with Surface Mount. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. Various 10 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The DC switcher's nominal voltage is 5V. You can find other relevant dc to dc converter ics by searching "MAX1954". In total, switching converter has 10 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 3V is the minimum required for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 4.95V. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. The duty cycle of the voltage regulator dc to dc can be set to 93 % on power-up or power-down to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulators have a maximum frequency of 360kHz.
MAX1954AEUB+ Features
Transistor Driver Outputs
Switching Frequency: 300kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
MAX1954AEUB+ Applications
There are a lot of Maxim Integrated MAX1954AEUB+ DC to DC converter applications.
- Shearing machines
- Solar power plants
- Servo drive system
- Automation technology
- Network technology
- Machining centers
- Game consoles
- Direct power supply system
- Constant current circuits
- Energy management systems
