MAX1954BEUB+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1954 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 11.35V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Max Duty Cycle | 89 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1954BEUB+ Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tube is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 3V~5.5V. Worked in an dc switcher with a -40°C~85°C TA rating. Using this switching controller, it is possible to switch at 300kHz. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Current Limit for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. 10 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. Search for "MAX1954" to find other relevant dc to dc converter ics. The switching converter has a total of 10 pins. Input voltage of dc dc voltage regulator should be 3V. DC regulator outputs 11.35V voltage based on test statistics. It's important to remember that the dc dc regulator's normaloutput current is 25A, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 89 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator has a maximum frequency of 360kHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN CURRENT MODE so that the need can be met more directly.
MAX1954BEUB+ Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 89 %
ALSO OPERATES IN CURRENT MODE
MAX1954BEUB+ Applications
There are a lot of Maxim Integrated MAX1954BEUB+ DC to DC converter applications.
- Electric heating, lighting
- Program control systems
- Printing equipment
- Milling machines
- Radio equipment
- Refrigerators of central air conditioners
- seismic instrument power circuits
- Terrestrial set-top boxes
- Packaging
- Shearing machines
