MAX1954CEUB+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1954 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 11.35V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Max Duty Cycle | 89 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1954CEUB+T Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). A 3V~5.5V voltage is supplied to the dc control and used for operating it. A -40°C~85°C TA dc switcher is not a problem. The switching controller can be switched at 300kHz. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Current Limit which allows efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at DUAL. A variety of 10 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 5V. You can find other relevant dc to dc converter ics by searching "MAX1954". 10 pins are present on switching converter. dc dc voltage regulators should have a minimum input voltage of 3V. DC regulator outputs 11.35V voltage according to the test statistics. If you start a project, note down the dc dc regulator's usual output current of 25A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 89 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulators have a maximum frequency of 360kHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN CURRENT MODE so that the need can be met more directly.
MAX1954CEUB+T Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 89 %
ALSO OPERATES IN CURRENT MODE
MAX1954CEUB+T Applications
There are a lot of Maxim Integrated MAX1954CEUB+T DC to DC converter applications.
- Communication system
- Overvoltage protection circuits in TV sets
- Computer rooms
- Current source circuits
- PSRR circuits
- Window air conditioners
- Large fire protection systems
- Sensitive electronic devices
- Driver circuits
- Pipe bending machines
