MAX1954EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1954 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 11.35V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Max Duty Cycle | 89 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1954EUB+T Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 3V~5.5V. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 300kHz. Surface Mount makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. The 10 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. MAX1954 can be used to locate other relevant dc to dc converter ics. Total pins of switching converter are 10. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 3V. Based on the test statistics, DC regulator outputs voltage 11.35V. You should note that the dc dc regulator's usual output current is 25A. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 89 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. 360kHz is the maximum frequency of this dc regulators. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN CURRENT MODE.
MAX1954EUB+T Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 89 %
ALSO OPERATES IN CURRENT MODE
MAX1954EUB+T Applications
There are a lot of Maxim Integrated MAX1954EUB+T DC to DC converter applications.
- Automatic plug-in machines
- Special machining machine tools
- Driver circuits
- Imported equipment
- Telecommunications equipment
- Window air conditioners
- Series voltage regulation circuits
- CNC system
- Wide-range voltage regulation circuits
- Thermal power
