MAX195BCWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 80mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX195 |
| Pin Count | 16 |
| Polarity | Bipolar, Unipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 55mW |
| Number of Bits | 16 |
| Input Type | Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital, Dual |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 2 B |
| Sampling Rate | 85 ksps |
| Voltage - Supply, Analog | ±5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 85k |
| Max Dual Supply Voltage | 5.25V |
| Output Bit Code | BINARY, OFFSET BINARY |
| Linearity Error-Max (EL) | 0.004% |
| Min Dual Supply Voltage | 4.75V |
| Sample and Hold / Track and Hold | TRACK |
| Dual Supply Voltage | 5V |
| Number of Converters | 2 |
| Conversion Rate | 85 ksps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 5V |
| Negative Supply Voltage-Nom | -5V |
| Differential Nonlinearity | 2 LSB |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX195BCWE+ Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 16-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 85k Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is ±5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX195 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Supply types can be categorized by Analog, Digital, Dual.The ADC converter is possible to mount the device with the help of Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.The maximal analog input voltage of this electrical AD converter is 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 55mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 80mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 85 ksps.There are 2 converters, which will convert numbers to words and figures to words. The dual supply type of this electronic AD converter is 5V.It operates with the maximal dual supply voltage of 5.25V.It operates with the minimal dual supply voltage of 4.75V.
MAX195BCWE+ Features
1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 4.75V
MAX195BCWE+ Applications
There are a lot of Maxim Integrated MAX195BCWE+ ADC applications.
- Spectrum Analysis
- TD-SCDMA, WiMAX
- Battery Operated Systems
- Broadband data applications
- Multicarrier, multimode digital receivers
- Music recording
- Digital Multimeters, PLC's (Programming Logic Controllers)
- 3-phase power control
- Transducer
- CMOS Image sensors for mobile applications
