MAX1966ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 186.993455mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1966 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| Control Features | Enable |
| Input Voltage (Min) | 2.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 102kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 127kHz |
| Max Duty Cycle | 95 % |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1966ESA+ Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tube solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 2.7V~5.5V. Suitable for a -40°C~85°C TA dc switcher. The switching controller can be switched at 102kHz. The Surface Mount allows it to be used for dc dc regulator in general. Enable provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 8 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. MAX1966 can be searched for other relevant dc to dc converter ics. Total pins of switching converter are 8. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 2.7V. A 800mV voltage of DC regulator was detected in the test statistics. It should be noted that the dc to dc regulator only accepts 5.5V voltage as input voltage. In most cases, the output current of the dc dc regulator will be 2A, so note that when you start the project. A duty cycle set at 95 % ensures voltage regulator dc to dc reliability during power-on and power-off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator127kHz has the maximum frequency.
MAX1966ESA+ Features
Transistor Driver Outputs
Switching Frequency: 102kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
MAX1966ESA+ Applications
There are a lot of Maxim Integrated MAX1966ESA+ DC to DC converter applications.
- seismic instrument power circuits
- Laboratories
- Alternators
- Computer application technology
- Communication system
- Household control circuits
- Gear/thread machining machines
- Program control systems
- Shearing machines
- Experimental setup
