MAX1967EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1967 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 2.7V~28V |
| Control Features | Enable |
| Input Voltage (Min) | 2.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 102kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 127kHz |
| Max Duty Cycle | 95 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1967EUB+T Overview
This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tape & Reel (TR) surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 2.7V~28V. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at 102kHz. The Surface Mount allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Enable. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 10 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. Searching "MAX1967" will return other relevant dc to dc converter ics. There are 10 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 2.7V. Statistically, DC regulator outputs 800mV volts. At most, the dc to dc regulator accepts 28V input voltage. The dc dc regulator's usual output current is 2A, which should be noted down when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 95 % to ensure reliability during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. It is estimated that this dc regulatorhas a maximum frequency of 127kHz.
MAX1967EUB+T Features
Transistor Driver Outputs
Switching Frequency: 102kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
MAX1967EUB+T Applications
There are a lot of Maxim Integrated MAX1967EUB+T DC to DC converter applications.
- Computed tomography (CT)
- Linear guide
- Die casting equipment
- Household control circuits
- Automation technology
- Various precision measuring instruments
- Hydraulic presses
- CMM
- Computer rooms
- Industrial controllers
