MAX19707ETM+
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX19707 |
| Pin Count | 48 |
| Operating Supply Voltage | 3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Interface | Serial |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 16.5mA |
| Number of Bits | 10 |
| Quiescent Current | 35mA |
| Resolution | 1.25 B |
| Sampling Rate | 45 Msps |
| Voltage - Supply, Analog | 2.7V~3.3V |
| Voltage - Supply, Digital | 2.7V~3.3V |
| Number of A/D Converters | 2 |
| Telecom IC Type | TELECOM CIRCUIT |
| Number of Converters | 8 |
| Conversion Rate | 45 Msps |
| Signal to Noise Ratio (SNR) | 54.2 dB |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Package / Case | 48-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Packaging | Tray |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | 5A991.B.1 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Modems |
| Power Rating | 84.6mW |
| Max Power Dissipation | 84.6mW |
MAX19707ETM+ Overview
In the manner of 48-WFQFN Exposed Pad, it is packaged as it is.10 Bits were used in the design of this electronic part.Tray contains it.In the 48 termination, an impedance-matching device is used for terminating a transmission line. This is referred to as the 48 termination.Using 2.7V~3.3V, this electrical device converts AC voltage into regulated DC voltage and drives a load with regulated DC power.It is important to note that the supply/digital voltage of this electrical device is 2.7V~3.3V.Based on the base part number, it will be possible for the related parts to be located.As far as the supply voltage goes, it should be kept at 3V.In terms of its design, it has 48 pins.It operates with the minimal operating temperature of -40°C to ensure its reliability.For reliability, it operates at 85°C, its maximal operating temperature.The pin count is 48.It supports the maximal supply voltage of 3.3V.The maximal voltage supplied for its operation reaches 2.7V.There is a high probability of obtaining high efficiency if the supply voltage at 3V is maintained.Powered by 16.5mA supply current, this DC switching regulator switches DC signals.Modems contains this part.A 8 converter can be used to convert numbers into words and figures into words as well.It uses TELECOM CIRCUIT as the telecom IC.In addition to 2 A/D converters, microcontrollers can read and process analog signals like voltage in digital form.
MAX19707ETM+ Features
MAX19707ETM+ Applications
There are a lot of Maxim Integrated MAX19707ETM+ AFE applications.
- Wireless local loop
- TD-SCDMA, WiMAX
- RADAR processing, digital oscilloscopes
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Smart antenna systems
- Imaging Systems
- AC motor control
- Medical Imaging
- Automotive
- Music recording
