MAX1980ETP+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | Quick-PWM™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 4V TO 28V |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX1980 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.75V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30μA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Current Limit, On Time Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 300kHz 550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 550kHz |
| Clock Sync | No |
| Duty Cycle | 50 % |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1980ETP+ Overview
With a 20-WQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4.5V~5.5V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~100°C TA dc switcher. The switching controller is capable of switching at the 200kHz 300kHz 550kHz position. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, On Time Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminals (s) are designed at QUAD. An array of 20 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. MAX1980 can be used to locate other relevant dc to dc converter ics. There are 20 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4.5V. A 1.75V voltage of DC regulator was detected in the test statistics. normally, the dc dc regulator's output current is 30μA, which you should keep in mind when starting a project. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 550kHz. DC to DC voltage regulator has a value of ALSO REQUIRES A SUPPLY OF 4V TO 28V to better satisfy the need. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 5.5V. The dc to dc voltage regulator belongs to the Quick-PWM? series.
MAX1980ETP+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 550kHz
Current Limit, On Time Control
PULSE WIDTH MODULATION
ALSO REQUIRES A SUPPLY OF 4V TO 28V
MAX1980ETP+ Applications
There are a lot of Maxim Integrated MAX1980ETP+ DC to DC converter applications.
- Solar power plants
- Window air conditioners
- Linear guide
- SMT equipment
- Terrestrial set-top boxes
- Balance equipment
- Smoke exhaust equipment
- Surge protection circuits
- Surface processing equipment
- Scientific testing
