MAX1992ETG+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Quick-PWM™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE IN PFM MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX1992 |
| JESD-30 Code | S-XQCC-N24 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz 450kHz 600kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MAX1992ETG+T Overview
As a result of 24-WFQFN Exposed Pad compact design, the switching controller is compatible with most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 4.5V~5.5V and has a 4.5V~5.5V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. There is a switch at 200kHz 300kHz 450kHz 600kHz that can be used with this controller. A generalization of dc dc regulator can be made using Surface Mount. Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a QUAD terminal on the switching converters. The 24 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. In addition to "MAX1992", there are other relevant dc to dc converter ics you can find. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.5V. This dc to dc regulator accepts only 5.5V input voltage at most. DC to DC voltage regulator has a value of CAN ALSO OPERATE IN PFM MODE to better satisfy the need. Thare are switch converters of the Quick-PWM? series.
MAX1992ETG+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 450kHz 600kHz
Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation
PULSE WIDTH MODULATION
CAN ALSO OPERATE IN PFM MODE
MAX1992ETG+T Applications
There are a lot of Maxim Integrated MAX1992ETG+T DC to DC converter applications.
- Correction machines
- Overvoltage protection circuits in TV sets
- Serial communication converter
- Hydraulic presses
- Magnetohydrodynamic power
- Electric heating, lighting
- Industrial controllers
- Milling machines
- Drilling machines
- SMT equipment
