MAX202CDRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 15mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX202CDRE4 Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tape & Reel (TR) package.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.On any Surface Mount-type PCB or development board, you can install this wide receiver.With respect to the power supply, this differential driver uses 4.5V~5.5V.The field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.As the base part number MAX202 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.Wide receiver with enhanced power dissipation control, 16-pin.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.ICs implement a total of 1 transceivers.Embedded 2 drivers are included on the integrator circuit.
MAX202CDRE4 Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX202CDRE4 Applications
There are a lot of Texas Instruments MAX202CDRE4 Drivers/Receivers/Transceivers applications.
- Cordless telephone
- Military satellite communications
- Indoor ad hoc meeting
- interconnection between switches
- Pocket PC
- AV receiver
- Televisions
- Shortwave receiver
- Fiber optic cable connection network
- Wireless modems
