banner_page

MAX202CDWR

16 Terminations5V 16 Pin MAX202 Receivers2/2 Drivers/Receivers2 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-MAX202CDWR
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 499
  • Description: 16 Terminations5V 16 Pin MAX202 Receivers2/2 Drivers/Receivers2 Functions(Kg)

Details

Tags

Parameters
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Number of Pins 16
Weight 420.395078mg
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Transceiver
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Line Driver or Receivers
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number MAX202
Pin Count 16
Operating Supply Voltage 5V
Power Supplies 5V
Nominal Supply Current 15mA
Logic Function Receiver, Transceiver
Data Rate 120Kbps
Differential Output NO
Output Polarity INVERTED
Protocol RS232
Input Characteristics SCHMITT TRIGGER
Number of Drivers/Receivers 2/2
Receiver Number of Bits 2
Duplex Full
Receiver Hysteresis 500mV
Number of Drivers 2
Number of Transceivers 1
Simplex/Duplex Full Duplex
Supply Voltage1-Nom 5V
Height 2.65mm
Length 10.3mm

MAX202CDWR Overview


This LED driver IC features an enhanced 16-SOIC (0.295, 7.50mm Width) package for driving common LEDs.Tape & Reel (TR) package is used to mount this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.You can place this wide receiver to any Surface Mount-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyThe field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 5V.In order to drive and receive signals from data, this wide receiver has 16 terminations integrated.This transceiver is packaged with 16 market standard pinoutsMAX202 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.This is a 16-pin driver IC with enhanced power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The integrator circuit is embedded with 2 drivers.

MAX202CDWR Features


Tape & Reel (TR) package
16 pin count
16 pins
5V power supply

MAX202CDWR Applications


There are a lot of Texas Instruments MAX202CDWR Drivers/Receivers/Transceivers applications.

  • Indoor ad hoc meeting
  • WDM transmission
  • 1x/2x Fiber Channel
  • Long-distance fiber optic network applications
  • Ship
  • Wireless multimedia center in smart home
  • Fiber distributed data interface (FDDI)
  • Satellite radio receiver
  • Car alarm systems
  • Tuner

Write a review

Note: HTML is not translated!
    Bad           Good