MAX202CPE+
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Operating Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
MAX202CPE+ Overview
Due to the enhanced 16-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tube package.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.On any Through Hole-type PCB or development board, this wide receiver can be placed.Power supply requirements for this differential driver are 4.5V~5.5V.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.Wide receiver can operate within the range of 5V supply voltages efficiently.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.It is packaged with 16 pinouts that are market standard for this particular transceiver.As the base part number MAX202 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation control is provided by this 16-pin driver IC.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.There is a subcategory named Line Driver or Receivers for this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.It implements 1 transceivers in total.The integrator circuit has embedded 2 drivers.With the EXTERNAL CHARGE PUMP function, this optical transceiver module improves accuracy and stability of signal management overall.An input voltage of 15mA is recommended for this integrating circuit to be able to drive LEDs.
MAX202CPE+ Features
Tube package
16 pin count
16 pins
5V power supply
MAX202CPE+ Applications
There are a lot of Maxim Integrated MAX202CPE+ Drivers/Receivers/Transceivers applications.
- IPTV front end
- Radio transmission
- Portable radio
- Optical sub-assembly (OSA)
- Home theater wiring-free
- Satellite radio receiver
- Cell phones
- Remote controls
- Bar, KTV wireless entertainment
- Pocket PC
