MAX202CWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX202CWE+ Overview
LED drivers with the enhanced 16-SOIC (0.295, 7.50mm Width) package will be able to drive a variety of common LEDs with ease.Tube package is used to mount this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.This differential driver uses 4.5V~5.5V for power supply.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.With a supply voltage range of 5V, this line driver ic operates efficiently.In order to drive and receive signals from data, this wide receiver has 16 terminations integrated.In this package, you will find 16 market-standard pinouts for this transceiver.This part number MAX202 can be used to search for more variants based on the product type, temperature, package, etc.The driver IC has improved power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.There is typically a resolution of 2 bits specified with this receiver.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.ICs implement a total of 1 transceivers.The part is embedded with 2 drivers, so it can be used with 2 devices.A EXTERNAL CHARGE PUMP function is also included on this optical transceiver module, which improves the overall signal management accuracy and stability.This is an IC with 8 standard serial I/O capabilities.
MAX202CWE+ Features
Tube package
16 pin count
16 pins
5V power supply
MAX202CWE+ Applications
There are a lot of Maxim Integrated MAX202CWE+ Drivers/Receivers/Transceivers applications.
- Copper connection network
- Point-to-point networking
- Wireless interactive experience
- Routers
- Changeing the frequency from IF to RF
- Fiber optic cable connection network
- Bar, KTV wireless entertainment
- Interconnection between switches and computers
- Military satellite communications
- Shortwave receiver
