MAX202CWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX202CWE+T Overview
This LED driver IC features an enhanced 16-SOIC (0.295, 7.50mm Width) package for driving common LEDs.There is a Tape & Reel (TR) package for this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.On any Surface Mount-type PCB or development board, this wide receiver can be placed.In terms of power supply, this differential driver utilizes 4.5V~5.5V.Up to 2/2 receivers/drivers can be installed simultaneously on this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.An operating voltage range of 5V is suitable for this line driver ic.Integrated into this wide receiver are 16 terminations that are used for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.MAX202 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.Wide receiver with enhanced power dissipation control, 16-pin.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.In the case of this receiver, a resolution of 2 bits is typically specified.This transceiver module is designed to operate from an input voltage supply of 5V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.There are 1 transceivers in total implemented by this IC.The integrator circuit comes with embedded 2 drivers.ICs with EXTERNAL CHARGE PUMP functions also improve the overall stability and accuracy of signal management.There are 8 standard serial I/O ports on this IC, which makes it a very versatile one.
MAX202CWE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX202CWE+T Applications
There are a lot of Maxim Integrated MAX202CWE+T Drivers/Receivers/Transceivers applications.
- Satellite radio receiver
- Fast Ethernet
- Thermal management
- IPTV front end
- interconnection between switches
- Low power, low voltage systems
- Changeing the frequency from IF to RF
- Switching system
- Fiber distributed data interface (FDDI)
- Metro access rings
