MAX202ECSE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX202ECSE+T Overview
With the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.In this package, the receiver is mounted in the Tape & Reel (TR) format.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.5V~5.5V.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.With a voltage range of 5V, this driver IC can operate efficiently.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.Since the base part number MAX202 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.This is a 16-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.This receiver is typically specified with a resolution of 2 bits. There is a 5V input voltage supply that can be used to operate this transceiver module.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.It is designed so that it can be operated from a 5V power supply with this driver IC.Transceivers implemented by this IC total 1 in total.The integrator circuit is embedded with 2 drivers.This optical transceiver module also features the EXTERNAL CHARGE PUMP function, improving the overall signal management stability and accuracy.This is an IC that comes with a total of 8 standard serial I/O ports.
MAX202ECSE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX202ECSE+T Applications
There are a lot of Maxim Integrated MAX202ECSE+T Drivers/Receivers/Transceivers applications.
- Car radio
- Thermal management
- Remote controls
- Fiber-to-the-desktop
- interconnection between switches
- Precision geodetic measurement
- Broadcast application
- Precision engineering measurement
- Tuner
- Wireless communication
