MAX202ECWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX202ECWE+ Overview
With the enhanced 16-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.There is a Tube package for this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.Any Surface Mount-type PCB or development board can be used with this wide receiver.A power supply of 4.5V~5.5V is used by this differential driver.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.A package consisting of 16 market standard pinouts is provided with this integrated circuit.Since the base part number MAX202 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation control driver IC featuring 16 pins.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.It provided a 2-bit resolution capability with this ic receiver.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.This driver IC is designed to operate from a 5V power supply.Transceivers implemented by this IC total 1 in total.Additionally, the optical transceiver module's EXTERNAL CHARGE PUMP function provides improved signal management accuracy and stability.An IC with 8 standard serial inputs and outputs, this is a great IC to use.optical transceivers such as this one have a total of 2 channels embedded into them.
MAX202ECWE+ Features
Tube package
16 pin count
16 pins
5V power supply
2 channels
MAX202ECWE+ Applications
There are a lot of Maxim Integrated MAX202ECWE+ Drivers/Receivers/Transceivers applications.
- Home theater wiring-free
- Telecom applications
- High-speed computer links
- Desktop PC
- Wireless HD Photography
- Thermal management
- transmission relay
- Data center
- Wireless showroom
- Automation systems
