MAX202ECWE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 15mA |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 |
| Receive Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0032A |
| Out Swing-Min | 10 V |
| High Level Input Current-Max | 0.0002A |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX202ECWE Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-SOIC (0.295, 7.50mm Width) package.There is a Tube package for this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.A differential driver like this uses 4.5V~5.5V of power.As many as 2/2 eligible receivers/drivers can be used simultaneously with this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.Wide receiver can operate within the range of 5V supply voltages efficiently.This wide receiver has 16 terminations for driving and receiving data signals.It is packaged with 16 pinouts that are market standard for this particular transceiver.With the part number MAX202 identifying the product type, temperature, package, etc., you can search with it to see more variants.There is a capability of 2-bit resolution with this ic receiver.There are typically 2 bits of resolution specified in the specifications of this receiver.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.Additionally, this optical transceiver module features the EXTERNAL CHARGE PUMP function, which improves the stability and accuracy of signal management in general.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 15mA of input current.
MAX202ECWE Features
Tube package
16 pin count
5V power supply
MAX202ECWE Applications
There are a lot of Maxim Integrated MAX202ECWE Drivers/Receivers/Transceivers applications.
- VoIP phones
- Wireless projection application for conferences
- IPTV front end
- Bridges
- transmission relay
- Satellite communication
- Low power, low voltage systems
- Structural bonding
- Shortwave receiver
- AV receiver
