MAX202EEWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 15mA |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 |
| Receive Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0032A |
| Out Swing-Min | 10 V |
| High Level Input Current-Max | 0.0002A |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX202EEWE+ Overview
The enhanced 16-SOIC (0.295, 7.50mm Width) package makes it an excellent LED driver.The package of this receiver is Tube.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.A Surface Mount-type PCB or development board can be used to place this wide receiver.A differential driver like this uses 4.5V~5.5V of power.As many as 2/2 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.This integrated circuit has 16 terminations designed for driving and receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.This part number MAX202 can be used to search for more variants based on the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 16 pins.This ic receiver provided a 2-bit resolution capability. In the case of this receiver, a resolution of 2 bits is typically specified.There is a subcategory named Line Driver or Receivers for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.A EXTERNAL CHARGE PUMP function is also included in this optical transceiver module, which improves stability and accuracy of signal management.Enough but no exceeding 15mA of input current should be supplied to the VCC pin of the ic receiver.
MAX202EEWE+ Features
Tube package
16 pin count
16 pins
5V power supply
MAX202EEWE+ Applications
There are a lot of Maxim Integrated MAX202EEWE+ Drivers/Receivers/Transceivers applications.
- Aircraft navigation
- SONET/SDH Network
- Wireless modems
- VoIP phones
- Vehicle
- Ship
- Broadcast application
- Wireless security systems
- Bar, KTV wireless entertainment
- High-speed computer links
