MAX203EEWP+G36
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | INTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX203 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Height | 2.35mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX203EEWP+G36 Overview
Driver ICs with enhanced 20-SOIC (0.295, 7.50mm Width) packages are excellent for driving LEDs with common characteristics.In the Tube package, this receiver is mounted.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 4.75V~5.25V.The field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.This line driver ic can operate efficiently with a supply voltage range of 5V.For driving and receiving signals from data, this wide receiver has 20 terminations integrated.The transceiver is packaged with 20 market standard pinouts so that it can be easily used.MAX203 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.Wide receiver with enhanced power dissipation control, 20-pin.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.It is typical for this receiver to have a resolution of 2 bits when it is specified.An input voltage supply of 5V is required to operate the transceiver module.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.In total, there are 1 transceivers implemented by this module isolated transceiver.The integrator circuit is embedded with 2 drivers.ICs with INTERNAL CHARGE PUMP functions also improve the overall stability and accuracy of signal management.An IC with 8 standard serial I/Os is provided in this package.
MAX203EEWP+G36 Features
Tube package
20 pin count
20 pins
5V power supply
MAX203EEWP+G36 Applications
There are a lot of Maxim Integrated MAX203EEWP+G36 Drivers/Receivers/Transceivers applications.
- Satellite radio receiver
- Wired telephone
- Wireless smart house
- Transmission stations
- TV signal transmission
- Desktop PC
- Wireless projection application for business talks
- Ethernet circuitry
- Data center
- Carrier phase observations
