MAX206CWG+
| Parameters | |
|---|---|
| Base Part Number | MAX206 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 14 |
| Nominal Supply Current | 20mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/3 |
| Dual Supply Voltage | 12V |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Number of Receivers | 3 |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
MAX206CWG+ Overview
Due to the enhanced 24-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.Tube package is used to mount this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 4.5V~5.5V.Up to 4/3 receivers/drivers can be installed simultaneously on this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.In this package, you will find 24 market-standard pinouts for this transceiver.Since the base part number MAX206 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation control driver IC featuring 24 pins.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.This transceiver module is designed to operate from an input voltage supply of 5V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.There is one driver IC in this package which is intended to be operated by 5V of power.It implements 1 transceivers in total.There are 3 receivers inside.4 drivers are embedded on the integrator circuit.With the TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP function, this optical transceiver module improves accuracy and stability of signal management overall.There are 14 serial I/Os on board this IC, and it has a standard VGA interface.
MAX206CWG+ Features
Tube package
24 pin count
24 pins
5V power supply
MAX206CWG+ Applications
There are a lot of Maxim Integrated MAX206CWG+ Drivers/Receivers/Transceivers applications.
- Wireless modems
- Wireless 3D game
- Bar, KTV wireless entertainment
- TV signal transmission
- 1x/2x Fiber Channel
- Thermal management
- Mainframes, workstations or storage devices
- Optical sub-assembly (OSA)
- Car alarm systems
- Portable radio
