MAX206EWG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | MAX206 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of I/O | 14 |
| Nominal Supply Current | 20mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/3 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Number of Receivers | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX206EWG+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 24-SOIC (0.295, 7.50mm Width) package.In the Tube package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.A power supply of 4.5V~5.5V is used by this differential driver.This electronic part can have?up to 4/3 eligible receivers/drivers on the field at once.?IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.24 terminations are integrated into this wide receiver for driving and receiving signals from data.There are 24 pinouts available on this transceiver which are market standard.MAX206 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control driver IC featuring 24 pins.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.An input voltage supply of 5V is required to operate the transceiver module.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.There are also 3 receivers in it as well.4 drivers are embedded on the integrator circuit.A TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP function is also included on this optical transceiver module, which improves the overall signal management accuracy and stability.There are 14 standard serial I/O ports on this IC, which makes it a very versatile one.
MAX206EWG+ Features
Tube package
24 pin count
24 pins
5V power supply
MAX206EWG+ Applications
There are a lot of Maxim Integrated MAX206EWG+ Drivers/Receivers/Transceivers applications.
- Fiber-to-the-desktop
- Car alarm systems
- Wireless modems
- Switches
- Interconnection between switches and computers
- Telecom applications
- Wireless communication
- Low power, low voltage systems
- Portable radio
- Structural bonding
