MAX20751EKX+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFQFN Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tray |
| Published | 2006 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Additional Feature | OUTPUT VOLTAGE= 0.5V TO 1.5V |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX20751 |
| Function | Step-Down |
| Number of Outputs | 4 |
| Output Type | PWM Signal |
| Input Voltage-Nom | 1.86V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 1.71V~3.63V |
| Control Features | Phase Control, Power Good, Ramp |
| Input Voltage (Min) | 1.71V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz~800kHz |
| Input Voltage (Max) | 1.98V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Serial Interfaces | PMBus |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 6mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX20751EKX+ Overview
In the 36-VFQFN Exposed Pad package, the switching controller meets most application requirements. For 4 outputs, the dc motor controller is appropriate. There is a Tray solid enclosure around the pmic. A total of PWM Signal dc switching's outputs can be handled by it. dc control's supply and operating voltages are 1.71V~3.63V. Suitable for work in a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 300kHz~800kHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Phase Control, Power Good, Ramp. SWITCHING REGULATOR analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. The 36 terminations can be used for a wide range of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 1.86V volts. Other relevant dc to dc converter ics can be found by searching "MAX20751". Switching converter has a total of 36 pins. An input voltage of 1.71V is the minimum required for the dc dc voltage regulator. The dc to dc regulator can only accept 1.98V input voltage. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sIn order to satisfy the need, DC to DC voltage regulator has a value of OUTPUT VOLTAGE= 0.5V TO 1.5V.
MAX20751EKX+ Features
PWM Signal Outputs
Switching Frequency: 300kHz~800kHz
Phase Control, Power Good, Ramp
PULSE WIDTH MODULATION
OUTPUT VOLTAGE= 0.5V TO 1.5V
MAX20751EKX+ Applications
There are a lot of Maxim Integrated MAX20751EKX+ DC to DC converter applications.
- Arc suppression circuits
- Emergency lighting monitoring equipment
- Textile machinery
- ATMs
- Production lines
- Smoke exhaust equipment
- Surface processing equipment
- Handheld GPS
- Serial communication converter
- Precision electronic equipment
