MAX20751EKX+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 36 |
| Weight | 92.589543mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Additional Feature | OUTPUT VOLTAGE= 0.5V TO 1.5V |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX20751 |
| Function | Step-Down |
| Number of Outputs | 4 |
| Output Type | PWM Signal |
| Operating Supply Voltage | 3.3V |
| Input Voltage-Nom | 1.86V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 24μA |
| Output Configuration | Positive |
| Output Current | 120A |
| Voltage - Supply (Vcc/Vdd) | 1.71V~3.63V |
| Control Features | Phase Control, Power Good, Ramp |
| Input Voltage (Min) | 1.71V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz~800kHz |
| Input Voltage (Max) | 1.98V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Serial Interfaces | PMBus |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
MAX20751EKX+T Overview
As a result of 36-VFQFN Exposed Pad compact design, the switching controller is compatible with most applications. It is sufficient to generate 4 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. PWM Signal dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 1.71V~3.63V. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Switching can be done at 300kHz~800kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Phase Control, Power Good, Ramp which allows efficient switching control. An analog IC with the SWITCHING REGULATOR signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . Various 36 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 1.86V. A search for "MAX20751" will reveal other relevant dc to dc converter ics. In total, switching converter has 36 pins. Input voltage of dc dc voltage regulator should be 1.71V. The dc to dc regulator can only accept a maximum input voltage of 1.98V. If you are starting a new project, you should note the dc dc regulator's typical output current is 120A. To better satisfy the need, DC to DC voltage regulator has a value of OUTPUT VOLTAGE= 0.5V TO 1.5V. To run the voltage regulator dc to dc safely and reliably, users should apply 3.3V to the voltage regulator dc to dc. It runs on a 24μA supply current.
MAX20751EKX+T Features
PWM Signal Outputs
Switching Frequency: 300kHz~800kHz
Phase Control, Power Good, Ramp
PULSE WIDTH MODULATION
OUTPUT VOLTAGE= 0.5V TO 1.5V
MAX20751EKX+T Applications
There are a lot of Maxim Integrated MAX20751EKX+T DC to DC converter applications.
- Computer rooms
- Computed tomography (CT)
- Motor controller circuits
- Serial communication converter
- CMM
- Various precision measuring detectors
- Product burn-in
- Laboratories
- Electric water heaters
- Radio equipment
