MAX207CAG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX207 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 20mA |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 5/3 |
| Driver Number of Bits | 5 |
| Receiver Number of Bits | 3 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 |
| Receive Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 1.99mm |
| Length | 8.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX207CAG+ Overview
Driver ICs with enhanced 24-SSOP (0.209, 5.30mm Width) packages are excellent for driving LEDs with common characteristics.The receiver is packaged in a Tube package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.The wide receiver can be mounted on any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.75V~5.25V.During operation, this electronic part may have up to 5/3 eligible receivers/drivers.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.With a supply voltage range of 5V, this line driver ic operates efficiently.This wide receiver has 24 terminations for driving and receiving data signals.As a standard package, this transceiver comes with a 24-pin layout that follows the market standard.This part number MAX207 can be used to search for more variants based on the product type, temperature, package, etc.As a result of the ic receiver, the resolution of the driver was increased to 5 bits.In the case of this receiver, a resolution of 3 bits is typically specified.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.Additionally, this optical transceiver module features the EXTERNAL CHARGE PUMP function, which improves the stability and accuracy of signal management in general.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 20mA of input current.
MAX207CAG+ Features
Tube package
24 pin count
5V power supply
MAX207CAG+ Applications
There are a lot of Maxim Integrated MAX207CAG+ Drivers/Receivers/Transceivers applications.
- Aircraft positioning
- Automation systems
- Wireless HD Photography
- Data center
- Wireless security systems
- Interconnection between switches and computers
- Carrier phase observations
- Fiber distributed data interface (FDDI)
- Wireless projection application for conferences
- Cable network front end
