MAX208CAG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX208 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of I/O | 16 |
| Nominal Supply Current | 20mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/4 |
| Receiver Number of Bits | 4 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Length | 8.2mm |
| Width | 5.29mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX208CAG+T Overview
Driver ICs with enhanced 24-SSOP (0.209, 5.30mm Width) packages are excellent for driving LEDs with common characteristics.In the Tape & Reel (TR) package, this receiver is mounted.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver requires a 4.5V~5.5V power supply.At any one time, this electronic part can have up to 4/4 eligible receivers/drivers.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.With a supply voltage range of 5V, this line driver ic operates efficiently.Wide receiver has 24 terminations built in for driving or receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.You can search with MAX208 to get more variants of this part, since it identifies the product type, temperature, package, etc.This is a 24-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In the case of this receiver, a resolution of 4 bits is typically specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.There is a subcategory named Line Driver or Receivers for this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.In total, there are 1 transceivers implemented by this module isolated transceiver.This electronic part can have?up to 4 eligible drivers on the field at once.?The EXTERNAL CHARGE PUMP function of this optical transceiver module improves the overall stability and accuracy of signal management.It is an integrated circuit with 16 serial I/Os that are in line with industry standards.
MAX208CAG+T Features
Tape & Reel (TR) package
24 pin count
24 pins
5V power supply
MAX208CAG+T Applications
There are a lot of Maxim Integrated MAX208CAG+T Drivers/Receivers/Transceivers applications.
- Carrier phase observations
- Wireless smart house
- Telecom applications
- Wireless HD Photography
- Remote controls
- Fast Ethernet
- Point-to-point networking
- Wireless modems
- Radio transmission
- Switches
