MAX208CDBG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX208 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Propagation Delay | 2 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/4 |
| Receiver Number of Bits | 4 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.0002A |
| Height | 1.95mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX208CDBG4 Overview
With the enhanced 24-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.The Tube package contains this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.The wide receiver can be mounted on any Surface Mount-type PCB or development board.It takes 4.5V~5.5V from the power supply to run this differential driver.At any one time, this electronic part can have up to 4/4 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.For driving and receiving signals from data, this wide receiver has 24 terminations integrated.There are 24 pinouts available on this transceiver which are market standard.Since the part number MAX208 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.The driver IC has improved power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In the case of this receiver, a resolution of 4 bits is typically specified.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.Line Driver or Receivers is a subcategory of this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.In total, there are 1 transceivers implemented by this module isolated transceiver.Embedded 4 drivers are included on the integrator circuit.
MAX208CDBG4 Features
Tube package
24 pin count
24 pins
5V power supply
MAX208CDBG4 Applications
There are a lot of Texas Instruments MAX208CDBG4 Drivers/Receivers/Transceivers applications.
- transmission relay
- Single to Multimode Fiber Conversion
- Clock radio
- Changeing the frequency from IF to RF
- Portable radio
- Servers
- Long-distance fiber optic network applications
- Desktop radio
- AV receiver
- Single fiber bidirectional application
