MAX208CDBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX208 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/4 |
| Receiver Number of Bits | 4 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.0002A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX208CDBR Overview
With the enhanced 24-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tape & Reel (TR) package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.This differential driver uses 4.5V~5.5V for power supply.At any one time, this electronic part can have up to 4/4 eligible receivers/drivers.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.It is packaged with 24 pinouts that are market standard for this particular transceiver.Since the part number MAX208 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.24-pin driver chip with enhanced power dissipation.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.In most cases, the receiver will be specified with a 4-bit resolution.There are two types of input voltage supply available for this IC, 5V.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.This IC implements 1 transceivers overall.The integrator circuit comes with embedded 4 drivers.
MAX208CDBR Features
Tape & Reel (TR) package
24 pin count
24 pins
5V power supply
MAX208CDBR Applications
There are a lot of Texas Instruments MAX208CDBR Drivers/Receivers/Transceivers applications.
- Military satellite communications
- Transmission stations
- Satellite ground stations
- VoIP phones
- Aircraft positioning
- Bar, KTV wireless entertainment
- Datacom networking applications
- Low power, low voltage systems
- Wireless projection application for conferences
- Wireless HD Photography
