MAX208CDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX208 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/4 |
| Receiver Number of Bits | 4 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.0002A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX208CDW Overview
An excellent driver IC for common LEDs thanks to its enhanced 24-SOIC (0.295, 7.50mm Width) package.The Tube package houses this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.This differential driver consumes 4.5V~5.5V for its power supplyAt any given time, there can be up to 4/4 eligible receivers/drivers for this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.ICs that are packaged with market standard pinouts are available on the market.You can search with MAX208 to get more variants of this part, since it identifies the product type, temperature, package, etc.This is a 24-pin driver IC with enhanced power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.As a general rule, this receiver has a resolution of 4 bits that is usually specified.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.It implements 1 transceivers in total.On the integrator circuit, there are 4 drivers embedded.
MAX208CDW Features
Tube package
24 pin count
24 pins
5V power supply
MAX208CDW Applications
There are a lot of Texas Instruments MAX208CDW Drivers/Receivers/Transceivers applications.
- interconnection between computers
- Cell phones
- Metro access rings
- WDM transmission
- Clock radio
- Carrier phase observations
- Automation systems
- Telecom applications
- Fiber distributed data interface (FDDI)
- Switches
