MAX208IDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX208 |
| Pin Count | 24 |
| Max Output Current | 60mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Propagation Delay | 500 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/4 |
| Receiver Number of Bits | 4 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.0002A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX208IDB Overview
This LED driver IC features an enhanced 24-SSOP (0.209, 5.30mm Width) package for driving common LEDs.Tube package is used to mount this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver uses 4.5V~5.5V for power supply.As many as 4/4 eligible receivers/drivers can be used simultaneously with this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.Driver ICs with a supply voltage range of 5V can operate efficiently.Wide receiver has 24 terminations built in for driving or receiving signals from data.A package consisting of 24 market standard pinouts is provided with this integrated circuit.Since the base part number MAX208 describes the product type, temperature, package, etc., you might get more options by searching with it.It is a 24-pin driver IC with enhanced power dissipation controls.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.In most cases, the receiver will be specified with a 4-bit resolution.There is a voltage input supply of 5V required for the operation of this integrated circuit.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.The module isolated transceiver implements a total of 1 transceivers.The integrator circuit comes with embedded 4 drivers.
MAX208IDB Features
Tube package
24 pin count
24 pins
5V power supply
MAX208IDB Applications
There are a lot of Texas Instruments MAX208IDB Drivers/Receivers/Transceivers applications.
- Wireless interactive experience
- Single to Multimode Fiber Conversion
- Wireless transmission
- Wireless smart house
- Single fiber bidirectional application
- Routers
- Wireless HD Photography
- Home theater wiring-free
- Cell phones
- Ethernet circuitry
