MAX208IDBR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX208 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Propagation Delay | 2 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/4 |
| Receiver Number of Bits | 4 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.0002A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
MAX208IDBR Overview
Due to the enhanced 24-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.In the Tape & Reel (TR) package, this receiver is mounted.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.You can place this wide receiver to any Surface Mount-type PCB or development board.This differential driver requires a 4.5V~5.5V power supply.As many as 4/4 receivers/drivers are eligible for use on this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.24 terminations are integrated into this wide receiver for driving and receiving signals from data.In this package, you will find 24 market-standard pinouts for this transceiver.For more variants of this part, try searching with the base part number MAX208, which indicates the product type, temperature, package, etc.This is a 24-pin driver IC with enhanced power dissipation control.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.In the case of this receiver, a resolution of 4 bits is typically specified.An input voltage supply of 5V is required to operate the transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.There are 1 transceivers in total implemented by this IC.The integrator circuit is embedded with 4 drivers.
MAX208IDBR Features
Tape & Reel (TR) package
24 pin count
24 pins
5V power supply
MAX208IDBR Applications
There are a lot of Texas Instruments MAX208IDBR Drivers/Receivers/Transceivers applications.
- IP cameras
- Fiber distributed data interface (FDDI)
- Satellite communication
- Cordless telephone
- Satellite communications networks
- Aircraft positioning
- Wireless HD Photography
- Wireless communication
- Wireless 3D game
- Cell phones
