MAX208IDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX208 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of I/O | 16 |
| Nominal Supply Current | 20mA |
| Propagation Delay | 2 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/4 |
| Receiver Number of Bits | 4 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.0002A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX208IDWR Overview
Driver ICs with enhanced 24-SOIC (0.295, 7.50mm Width) packages are excellent for driving LEDs with common characteristics.Tape & Reel (TR) package is used for this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver requires a 4.5V~5.5V power supply.The field can have up to 4/4 eligible receivers/drivers at once when using this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.24 terminations are integrated into this wide receiver for driving and receiving signals from data.As a standard package, this transceiver comes with a 24-pin layout that follows the market standard.You can search with MAX208 to get more variants of this part, since it identifies the product type, temperature, package, etc.This is a 24-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In the case of this receiver, a resolution of 4 bits is typically specified.An input voltage supply of 5V is required to operate the transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The integrator circuit has embedded 4 drivers.There are 16 standard serial I/O ports on this IC, which makes it a very versatile one.
MAX208IDWR Features
Tape & Reel (TR) package
24 pin count
24 pins
5V power supply
MAX208IDWR Applications
There are a lot of Texas Instruments MAX208IDWR Drivers/Receivers/Transceivers applications.
- Desktop PC
- 1x/2x Fiber Channel
- Car alarm systems
- Wireless projection application for conferences
- Interconnection between switches and computers
- Wireless projection application for business talks
- Cable network front end
- Portable radio
- VoIP phones
- Wireless network systems
