MAX211CAI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX211 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 18 |
| Nominal Supply Current | 11mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Number of Receivers | 5 |
| Height | 1.78mm |
| Length | 10.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX211CAI+ Overview
The enhanced 28-SSOP (0.209, 5.30mm Width) package makes it an excellent LED driver.The Tube package contains this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.This differential driver uses 4.5V~5.5V for power supply.At any one time, this electronic part can have up to 4/5 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.In order to drive and receive signals from data, this wide receiver has 28 terminations integrated.Transceiver comes with 28 standard pinouts that meet the market's requirements.With the part number MAX211 identifying the product type, temperature, package, etc., you can search with it to see more variants.This is a 28-pin driver IC with enhanced power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.ICs implement a total of 1 transceivers.The module isolated transceivers are 5 receivers.Embedded 4 drivers are included on the integrator circuit.The TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP function of this optical transceiver module improves the overall stability and accuracy of signal management.A 18-serial I/O IC is available which provides a standard interface for serial communication.
MAX211CAI+ Features
Tube package
28 pin count
28 pins
5V power supply
MAX211CAI+ Applications
There are a lot of Maxim Integrated MAX211CAI+ Drivers/Receivers/Transceivers applications.
- Car alarm systems
- Wireless smart house
- Wireless network systems
- TV signal transmission
- VoIP phones
- Bridges
- Wireless access points
- Wired telephone
- Clock radio
- Wireless multimedia center in smart home
