MAX211CWI+
| Parameters | |
|---|---|
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX211 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 18 |
| Nominal Supply Current | 11mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Dual Supply Voltage | 12V |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Number of Receivers | 5 |
| Height | 2.35mm |
MAX211CWI+ Overview
LED drivers benefit from this IC's enhanced 28-SOIC (0.295, 7.50mm Width) package.In the Tube package, this receiver is mounted.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.A differential driver like this uses 4.5V~5.5V of power.As many as 4/5 eligible receivers/drivers can be used simultaneously with this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.In order to drive and receive signals from data, this wide receiver has 28 terminations integrated.As a standard package, this transceiver comes with a 28-pin layout that follows the market standard.You can search with MAX211 to get more variants of this part, since it identifies the product type, temperature, package, etc.Wide receiver with enhanced power dissipation control, 28-pin.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.An input voltage supply of 5V is required to operate the transceiver module.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.This IC implements 1 transceivers overall.The module isolated transceivers are 5 receivers.Embedded 4 drivers are included on the integrator circuit.The TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP function of this optical transceiver module improves the overall stability and accuracy of signal management.In this instance, there are a total of 18 serial input/output ports on the IC.
MAX211CWI+ Features
Tube package
28 pin count
28 pins
5V power supply
MAX211CWI+ Applications
There are a lot of Maxim Integrated MAX211CWI+ Drivers/Receivers/Transceivers applications.
- Car radio
- Shortwave receiver
- Car alarm systems
- Wireless showroom
- Precision engineering measurement
- Precision geodetic measurement
- Cordless telephone
- Wireless projection application for business talks
- Interconnection between switches and computers
- Tuner
